When it comes to roofing materials, rolled roofing is a popular choice for many homeowners due to its cost-effectiveness and ease of installation. Whether you are considering a rolled roofing option for a shed, garage, or even your main home, understanding the rolled roofing installation cost is crucial for making an informed decision. This article will guide you through the factors that influence the cost, the benefits of rolled roofing, and the steps involved in its installation.
What is Rolled Roofing?
Rolled roofing is a type of roofing material that comes in large rolls, typically made from asphalt or modified bitumen. It is often used for low-slope roofs and is favored for its affordability and straightforward installation process. Rolled roofing is suitable for various structures, including:
- Sheds
- Garages
- Carports
- Flat roofs on residential homes
Why Choose Rolled Roofing?
1. Cost-Effectiveness
One of the primary reasons homeowners choose rolled roofing is its affordability. Compared to traditional shingles, rolled roofing materials are significantly cheaper, making them an attractive option for budget-conscious individuals.
Read too: Is It Reasonable to Ask the Seller to Replace the Roof?
2. Easy Installation
Rolled roofing is relatively easy to install, even for those with minimal roofing experience. The large rolls can be laid out quickly, and many homeowners opt for a DIY approach, which can save on labor costs.
3. Lightweight
Rolled roofing is lightweight, which means it doesn’t put excessive weight on the underlying structure. This feature can be particularly beneficial for older buildings or structures with weight limitations.
4. Durability
When properly installed, rolled roofing can last for up to 20 years, making it a long-lasting solution for low-slope roofs. It is also resistant to UV rays and can withstand varying weather conditions.
Factors Influencing Rolled Roofing Installation Cost
Understanding the rolled roofing installation cost involves considering several factors that can impact the overall price. Here are some key aspects to keep in mind:
1. Material Costs
The type of rolled roofing material you choose will significantly affect the overall cost. Here are some common materials and their average costs:
- Asphalt Rolled Roofing: Typically costs between $0.50 to $1.50 per square foot.
- Modified Bitumen: Generally costs between $1.50 to $3.00 per square foot.
2. Roof Size
The size of the area to be covered is a major factor in determining installation costs. To calculate the total cost, you’ll need to measure the roof’s square footage. The larger the area, the more materials you will need, which will increase your overall costs.
3. Labor Costs
If you decide to hire professionals for the installation, labor costs will be a significant part of the total expense. Labor costs vary by region, but you can expect to pay between $1.00 to $2.50 per square foot for installation services. If you’re considering a DIY project, you can save on these costs.
4. Removal of Old Roofing
If you are replacing an existing roof, you may need to factor in the cost of removing the old roofing material. This process can add an additional $1.00 to $2.00 per square foot, depending on the complexity of the removal.
5. Permits and Inspections
In some regions, you may need to obtain permits for roofing work, which can add to the overall cost. Additionally, inspections may be required, depending on local building codes. Permit fees typically range from $50 to $200.
6. Geographic Location
Your location can influence both material and labor costs. Urban areas often have higher prices due to increased demand, while rural areas may offer more competitive rates. It’s essential to research local pricing to get an accurate estimate.
7. Additional Features
If your roofing project involves additional features, such as skylights, vents, or custom flashing, these can add to the overall installation cost. Plan for these additional expenses in your budget.
Average Rolled Roofing Installation Cost Breakdown
To provide a clearer picture of what to expect in terms of rolled roofing installation cost, let’s break down a typical scenario.
Example Scenario
Roof Size: 1,000 square feet
Material: Asphalt rolled roofing
Installation: Professional labor
Old Roof Removal: Yes
Cost Calculation
- Material Cost: 1,000 sq. ft. x $1.00 (average asphalt cost) = $1,000
- Labor Cost: 1,000 sq. ft. x $2.00 (average labor cost) = $2,000
- Removal of Old Roofing: 1,000 sq. ft. x $1.50 (removal cost) = $1,500
- Total Cost: $1,000 (material) + $2,000 (labor) + $1,500 (removal) = $4,500
In this scenario, the total installation cost for rolled roofing would be approximately $4,500. Keep in mind that these prices can vary significantly based on the factors mentioned earlier.
The Installation Process
If you decide to take the DIY route, here’s a step-by-step guide on how to install rolled roofing:
1: Preparation
- Measure the Roof: Calculate the total square footage of the roof to determine how much material you need.
- Gather Materials: Purchase the rolled roofing, roofing cement, nails, and any additional materials required.
- Prepare the Roof Surface: Ensure the roof surface is clean, dry, and free of debris.
2: Install Underlayment
- Lay Underlayment: If required, install an underlayment to provide extra protection against moisture.
- Secure with Nails: Use roofing nails to secure the underlayment to the roof surface.
3: Unroll the Roofing
- Position the Roll: Start at the lowest point of the roof and position the first roll of roofing.
- Unroll Carefully: Unroll the roofing material, making sure it lies flat against the underlayment.
4: Secure the Roofing
- Nail the Roofing: Use roofing nails to secure the rolled roofing, placing them about every 12 inches along the edges and seams.
- Overlap the Rolls: When adding subsequent rolls, overlap the edges by about 6 inches to ensure a watertight seal.
5: Apply Roofing Cement
- Seal the Joints: Use roofing cement to seal the seams and edges of the roofing material.
- Smooth Out the Cement: Ensure the cement is smooth and covers any exposed nails.
6: Finishing Touches
- Trim Excess Material: Use a utility knife to trim any excess roofing material along the edges.
- Clean Up: Dispose of any debris and tools, ensuring the area is tidy.
Maintenance Tips for Rolled Roofing
Once your rolled roofing is installed, proper maintenance is essential to prolong its lifespan. Here are some maintenance tips:
1. Regular Inspections
Inspect your roof at least twice a year and after severe weather events. Look for signs of damage, such as tears, punctures, or loose seams.
2. Keep It Clean
Remove debris, leaves, and branches from the roof to prevent moisture buildup and blockages in drainage systems.
3. Address Repairs Promptly
If you notice any damage during inspections, address it immediately to prevent further issues.
4. Watch for Pests
Keep an eye out for signs of pests or rodents, as they can cause damage to your roofing material.
5. Reapply Sealant
Over time, the roofing cement may degrade. Reapply sealant to seams and joints as needed to maintain waterproofing.
Conclusion
Understanding the rolled roofing installation cost is essential for homeowners looking to replace or install new roofing materials. By considering the factors that influence costs, calculating your budget accurately, and following the proper installation process, you can achieve a successful roofing project. Whether you choose to do it yourself or hire a professional, maintaining your rolled roofing will ensure its longevity and protect your home for years to come.
Leave a Reply